ANNUAL CATALOG GIFT BOX with COUNTRY FLOWERS - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a gift Box that measures  2 3/4  x  5  x  1".  I used the Country Flowers stamp set & dies Bundle, available May 1st, Country Woods Designer Series Paper, Stampin' Blends and the Sheer Ribbon Combo Pack.
You can watch my Video Tutorial Here!

I started with a piece of Boho Blue Cardstock sized

8  x  7 3/4"

I scored the  8" side at:

1/2,  3 1/4,  4 1/4  and  7"

I scored the  7 3/4" side at:

1,  6  and  7"

To cut an put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Carcdstock should look after scoring and cutting.

I attached several pieces of Country Woods Designer Series Paper to the box.

(2)  2 1/2  x  4 3/4"  front and back

(2)  2 1/2  x  3/4"  short sides

(2)  3/4  x  4 3/4"  long sides

I attached the DSP to the box with Liquid Glue.

I stamped the Bucket, Stool and Flowers onto Basic White Cardstock with Tuxedo Black Ink.

I cut the images out using the Country Flowers dies.

I colored the images with Stampin' Blends.

Stool

Light & Dark Boho Blue

Bucket

Light & Dark Smokey Slate

Flowers

Light & Dark Boho Blue

Light & Dark Lemon Lolly

Light & Dark Old Olive

I attached the Flowers to the Bucket first and then the Bucket to the Stool next with Liquid Glue.

I attached the entire piece to the front of the box with Dimensionals.

I tied Lemon Lolly Sheer Ribbon around the top flap and tied a bow on the top.

For the final touch I added 3 Lemon Lolly Solid Gems around the front of the box.

You can shop for your Stampin' Up! supplies with me here.

Supplies:

Country Flowers stamp set & dies Bundle - Available May 1st

Country Woods Designer Series Paper  -  Available May 1st

Boho Blue Cardstock

Basic White Cardstock

Tuxedo Black Ink

Stampin' Blends

Sheer Ribbon Combo Pack

Solid Gems

Tear & Tape

Liquid Glue

Dimensionals

Corner Rounder

Thank you for visiting my Blog today.  I hope you enjoyed my Gift box.

See you next time!

Love and Hugs,

Cathryn

INTERATIVE TREAT BOX with ATTENTION SHOPPERS BUNDLE - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is an interactive Treat Box that measures  3 1/2  x  3 1/2  x  1".  I used a new Bundle, Available May 1st, called Attention Shoppers.  I also used the Stylish Shapes dies and Bright & Beautiful Designer Series Paper.
You can watch my Video Tutorial Here!

I started with a piece of Lemon Lolly Cardstock sized

9 1/2  x  8 1/2"

I scored the  9 1/2" side at:

1/2,  4,  5  and  8 1/2"

I scored the  8 1/2" side at:

1,  4 1/2  and  5 1/2"

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached several pieces of Bright & Beautiful Designer Series Paper to the box.

(2)  3 1/4  x  3 1/4"  front and back

(2)  3 1/4  x  2 3/4"  front and back of back flap

(4)  3 1/4  x  3 1/4"  sides

I attached the DSP to the box with Liquid Glue.

I cut the two pieces of the Shopping Cart from Smokey Slate Cardstock using the Attention Shoppers dies.

I Glued the top to the bottom with Liquid Glue.

I cut a 3" circle from Bright & Beautiful DSP using the Stylish Shapes dies.

I attached the shopper cart to the circle with Liquid Glue ATTACHING ONLY THE BOTTOM AND SIDES LEAVING THE BODY AND TOP OF THE CART LOOSE.

I stamped the Bottle, Flowers and Gift Bag, from Attention Shoppers stamp set, onto Basic White Cardstock with Tuxedo Black Ink.

I colored the images with Stampin' Blends.

Bottle:

Light Boho Blue, Light Old Olive, Dark Night of Navy and Dark Crumb Cake

Gift Bag:

Light Bubble Bath and Light Smokey Slate

Flowers:

Light Boho Blue, Dark Bubble Bath, Dark Granny Apple Green

I cut the images out using the Attention Shoppers dies.

I tied Lemon Lolly Sheer Ribbon around the side of the box and tied a bow on the left side.

I attached the 3" circle to the front of the box, over the ribbon, with Dimensionals.

I cut a 1 1/2" square from Basic White Cardstock using the Stylish Shapes dies.

I stamped the sentiment, "just for you", onto the square with Boho Blue Ink.

I attached the square inside the cart, almost to the top of the box, with Liquid Glue.

I slipped the 3 items inside the Cart where is was not glued on.

The recipient can take the items in and out and move them around.

For the final touch I added 3 Blue Rainbow Dots around the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Attention Shoppers stamp set & dies Bundle  -  Available May 1st

Stylish Shapes dies

Bright & Beautiful Designer Series Paper

Lemon Lolly Cardstock

Basic White Cardstock

Smokey Slate Cardstock

Tuxedo Black Ink

Boho Blue Ink

Stampin' Blends

Sheer Ribbon Combo Pack

Rainbow Dots

Tear & Tape

Liquid Glue

Dimensionals

Corner Rounder

Thank you for visiting my Blog today.   I hope you enjoyed my box.

See you next time!

Love & Hugs,

Cathryn

HEARTS & HUGS TREAT BOX with UNBOUNDED LOVE DIES - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends! 

 My project today is a Treat Box that measures  2 1/4  x  3 1/2  x  1".  I used the Hearts & Hugs stamp set and dies Bundle, Unbounded Love dies and Unbounded Beauty Designer Series Paper.

You can watch my Video Tutorial Here!

I started with a piece of Thick Basic White Cardstock sized

7  x  5 1/2"

I scored the  7" side at:

2 1/4,  3 1/4,  5 1/2  and  6 1/2"

I scored the  5 1/2" side at:

1  and  4 1/2"

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached several pieces of Unbounded Beauty Designer Series Paper to the box.

(2)  2  x  3 1/4"  front and back

(2)  3/4  x  3 1/4"  long sides

(2)  2  x  3/4" short sides

I attached the DSP to the box with Liquid Glue.

I stamped the Mouse, from Hearts & Hugs stamp set, onto Basic White Cardstock using Tuxedo Black Ink.

I cut the image out using the matching dies.

I colored the image with Stampin' Blends.

Light & Dark Bubble Bath  -  Heart, Nose and inside Ear.

Light Smokey Slate and a Color Lifter  -  Mouse Body, Tail and Feet

I cut 2 frames using the Unbounded Love dies.

I cut the large one from Thick Basic White Cardstock and the inside frame from Pretty In Pink Cardstock.

I attached the Pink Frames on top of the White die cut with Liquid Glue.

I attached the Mouse to the middle with Dimensionals.

I stamped the sentiment onto Basic White Cardstock using Tuxedo Black Ink.

I cut the sentiment out with a label from the Unbounding Love dies.

I wound Pretty In Pink Bordered Ribbon around the long side of the box and tied a bow on the top to close it.

I attached the sentiment onto the bottom/front, over the Ribbon, with Liquid Glue on either side of the label back.

I attached the Mouse and Ovals above the sentiment, overlapping a little, with Dimensionals.

For the final touch I added 3 Pretty In Pink In Color Shimmer Gems around the front of the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Hearts & Hugs stamp set & dies Bundle  -  Available May 1st

Unbounded Love dies  -  Available May 1st

Unbounded Beauty Designer Series Paper  -  Available May 1

Thick Basic White Cardstock

Pretty In Pink Cardstock

Basic White Cardstock

Tuxedo Black Ink

Stampin' Blends

2024-2025 In Color Shimmer Gems

Tear & Tape

Liquid Glue

Dimensionals

Simply Scored

Take Your Pick Tool

Thank you for visiting my Blog today.  I hope you enjoyed my Treat Box.

See you next time!

Love and Hugs,

Cathryn

COFFEE CARD & TREAT BOX with LATTE LOVE - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Treat Box for a Coffee Gift Card and Candy that measures 3 3/4  x  4  x  3/4".  I used the Latte Love stamp set & dies bundle, the Decorative Circle Punch, Stylish Shapes dies, Mini Pocket Envelope dies and A Little Latte Designer Series Paper.
You can watch my Video Tutorial Here!

I started with a piece of Pretty Peacock Cardstock sized

9 1/2  x  6 1/4"

I scored the  9 1/2" side at:

1/2,  4 1/4,  5  and  8 3/4"

I scored the  6 1/4" side at:

3/4,  4 3/4  and  5 1/2"

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of what your Cardstock should look like after scoring and cutting.

I attached several pieces of A Little Latte Designer Series Paper to the box.

(2)  3 1/2  x  3 3/4"  front and back

(2)  1/2  x  3 1/2"  shorter sides

(2)  1/2  x  3 3/4"  longer sides

I attached the DSP to the box with Liquid Glue.

I stamped the Cup, from Latte Love stamp set, onto Lost Lagoon Cardstock with Pretty Peacock Ink.

I stamped the Coffee with Pecan Pie Ink.

I cut the images out using the Latte Love dies.

I colored the white edge of the Coffee die cut with a Dark Pecan Pie Blend.

I put the Coffee onto the Cup with Liquid Glue.

I attached the pieces of the French Press together using Liquid Glue and my Silicone mat.

I attached the French Press to the upper left of the box front with Liquid Glue.

I cut a circle out of Pretty Peacock Cardstock using the Decorative Circle Punch.

I cut a  2 1/8" circle from A Little Latte DSP using the Stylish Shapes dies.

I attached the two circles together with Liquid Glue.

I attached the Cup to the circles with Dimensionals,

I attached the entire piece to the front of the box with more Dimensionals.

I cut an oval label from Basic White Cardstock using the Mini Pocket Envelope dies.

I stamped the sentiment, from Latte Love stamp set, with Pretty Peacock Ink.

I attached the label above the Cup with Liquid Glue.

I added 3 Pecan Pie Swirl Dots around the box for the final touch.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Latte Love stamp set

Decorative Circle Punch

Stylish Shapes dies

M in I Picket Envelope dies

A Little Latte Designer Series Paper

Pretty Peacock Cardstock

Smokey Slate Cardstock

Pool Party Cardstock

Lost Lagoon Cardstock

Early Espresso Cardstock

Pretty Peacock Ink

Pecan Pie Ink

Dark Pecan Pie Stampin' Blend

Swirl Dots

Tear & Tape

Liquid Glue

Dimensionals

Simply Scored

Take Your Pick Tool

Corner Rounder

Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my latte box.

See you next time!

Love & Hugs,

Cathryn

LIP BALM KEY CHAIN BOX with SUBMARINE LIFT - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Box for a Lip Balm Holder that measures  3 1/2  x  2  x  1 1/2".  I used the Submarine Life stamp set & punch Bundle, Perennial Postage dies and Lighter Than Air Designer Series Paper.
You can watch my Video Tutorial Here!

I started with a piece of Tahitian Tide Cardstock sized

7 1/2  x  7 1/4"

I scored the  7 1/2" side at:

1/2,  2 1/2,  4  and  6".

I scored the  7 1/4" side at:

1 1/2,  5  and  6 1/2".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of what your Cardstock should look like after cutting.

I attached several pieces of Lighter Than Air Designer Series Paper to the box.

(2)  3 1/4  x  1 3/4"  front and back

(2)  3 1/4  x  1 1/4"  long sides

(2)  1 3/4  x  1 1/4"  short sides

I attached the DSP to the box with Liquid Glue.

I stamped the Submarine onto Basic White Cardstock.

Daffodil Delight Ink  -  Body of Submarine

Pumpkin Pie Ink  -  Propellor

Granny Apple Green Ink  -  Periscope

I cut the images out using the Submarine Life Builder Punch.

I attached the pieces of the Submarine together using Liquid Glue and my Silicone Mat.

I cut a rectangle from Basic White Cardstock using the Perennial Postage dies.

I stamped the sentiment, from Submarine Lift stamp set, onto the label with Tahitian Tide Ink.

I but the end off the label and attached it to the upper left of the box with Liquid Glue.

I tied Lemon Lime Twist Ribbon around the right side of the box twice and tied a bow at the top.

I attached the Submarine onto the box with Dimensionals and Mini Dimensionals.

For the final touch I added 3 Azure Afternoon Rainbow Dots to the Submarine.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Submarine Life stamp set & Submarine Life Builder Punch Bundle

Perennial Postage dies

Lighter Than Air Designer Series Paper

Tahitian Tide Cardstock

Basic White Cardstock

Tahitian Tide Ink

Daffodil Delight Ink

Pumpkin Pie Ink

Lemon Lime Twist Ribbon

Rainbow Dots

Tear & Tape

Liquid Glue

Dimensionals & Mini Dimensionals

Simply Scored

Take Your Pick Tool

Corner Rounder

Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Submarine Box.

See you next time!

Love and Hugs,

Cathryn

FUN FOLD GET WELL CARD with SUBMARINE LIFE - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Fun Fold Get Well Card.  I used the Submarine Life Stamp Set & Punch Bundle, Warmest Heart stamp set, Perennial Postage dies and Lighter Than Air Designer Series Paper.
You can watch my Video Tutorial Here!

I started with a piece of Tahitian Tide Cardstock sized

4 1/4  x  11"

I scored the  11" side at:

5 1/2"

I cut  2 3/4" off the front of the card.

I attached a Striped piece of Lighter Than Air Designer Series Paper, sized

2 1/2  x  4"

 to the left side of the front of the card.

Next I attached the "cut off" piece of Cardstock to the middle of the front of the Card.

I attached a piece of Dotted DSP, sized

4  x  2 1/2"

 to the horizontal piece of Cardstock I just attached.

I cut a piece of Basic White Cardstock sized

5 1/4  x  4"

I stamped the underwater scene, from Submarine stamp set, onto the piece of Basic White Cardstock.

Tahitian Tide Ink  -  Sentiment, Bubbles and little fish.

Crumb Cake Ink  -  Sea Floor

Parakeet Party & Granny Apple Green Inks  -  Sea Grass

Real Red Ink  -  Crab

Large Goldfish & 3 small  -  Pumpkin Pie Ink

Daffodil Delight Ink  -  Starfish

Boho Blue Ink  -  Small Fish

I attached the stamped Basic White Cardstock inside the card with Liquid Glue.

I attached another piece of Basic White Cardstock sized

2 1/2  x  4"

to the left side of the inside of the card for a place to write a note.

I stamped the Submarine onto Basic White Cardstock.

Submarine Body  -  Daffodil Delight Ink

Propellor  -  Pumpkin Pie Ink

Periscope  -  Parakeet Party Ink

I cut the Submarine pieces out using the Submarine Builder Punch.

I put the Submarine pieces together with Liquid Glue and a Silicone Mat.

I cut a 1 3/8  x  5/8" label from Basic White Cardstock using the Perennial Postage dies.

I stamped the sentiment "Get Well Soon", from Warmest Heart stamp set, onto the label with Tahitian Tide Ink.

I attached the label to the bottom right of the Card Front with Liquid Glue.

I attached the Submarine to the Card Front with Dimensionals and Mini Dimensionals.

For the final touch I added 3 Azure Afternoon Rainbow Dots around the card.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Submarine Lift stamp set & Punch Bundle

Warm Heart stamp set

Perennial Postage dies

Lighter Than Air Designer Series Paper

Tahitian Tide Cardstock

Basic White Cardstock

Daffodil Delight Ink

Pumpkin Pie Ink

Granny Apple Green Ink

Parakeet Party Ink

Crumb Cake ink

Real Red Ink

Boho Blue Ink

Rainbow Dots

Liquid Glue

Dimensionals & Mini Dimensionals

Simply Scored

Take Your Pick Tool

Thank you for visiting my Blog today.  I hope you enjoyed my Fun Fold Card.

See you next time!

Love & Hugs,

Cathryn

SQUISHY CHEESE TOY GIFT BOX with CUTEST COW - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Box that measures  3  x  4  x  1 3/4".  I used the Cutest Cow stamp set & Punch Bundle, Bee Mine Designer Series Paper, Sheer Ribbon Combo Pack and Stampin' Blends.
You can watch My Video Tutorial Here!

I started with a piece of Real Red Cardstock sized

10  x  6"

I scored the  10" side at:

1 3/4,  4 3/4,  6 1/2  and  9 1/2"

I scored the  6" side at:

1 3/4,  4 1/4  and  5 1/2"

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached several pieces of Bee Mine Designer Series Paper to the box.

Upper Box - Red DSP

(2)  2 3/4  x  1"

Lower Box

(2)  2 3/4  x  2 1/4"  front and back

BEFORE putting the front piece on I stamped the sentiment to the upper left of the DSP with Real Red Ink.

(2)  1 1/2  x  2 1/4"  sides

I attached the DSP to the box with Liquid Glue.

I stamped the images from Cutest Cow stamp set onto Basic White Cardstock with Tuxedo Black Ink.

I cut the Cow pieces out using the Punch.

I fussy cut the Milk Can and Bell out by hand.

I put the Cow together with Liquid Glue.

I colored the images with Stampin' Blends.

Light & Dark Smokey Slate  -  Cow

Dark Petal Pink  -  Muzzle

Light & Dark Real Red  -  Milk Can and Bell

I cut a piece of Granny Apple Green Cardstock to

2 3/4  x  3/4"

I stamped the Grass image all over the Cardstock with Granny Apple Green Ink.

I attached the "Grass" to the bottom of the front of the box with Liquid Glue.

I attached the Milk Can to the left side of the Grass with Liquid Glue.

I attached the Cow to the middle of the Grass with Dimensionals.

I attached the Bell just below the Cow's head with Liquid Glue.

I tied a tiny bow with Yellow Twine and attached it to the top of the Cow's Bell with Liquid Glue.

I punched 2 sets of holes in the top of the box and ran Lemon Lolly Sheer Ribbon through them, tying a bow at the front.

For the final touch I added 2 Red Flowers, from the Hearts & Flowers Embellishments, in front of the Cow.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Cutest Cow stamp set & Punch Bundle

Bee Mine Designer Series Paper

Real Red Cardstock

Granny Apple Green Cardstock

Basic White Cardstock

Tuxedo Black Ink

Granny Apple Green Ink

Real Red Ink

Stampin' Blends

Baker's Twine 3 Pack

Sheer Ribbon Combo Pack

Hearts & Flowers Embellishments

Tear & Tape

Liquid Glue

Dimensionals

Simply Scored

Take Your Pick Tool

Hole Punch

Thank you for visiting my Blog today.  I hope you liked my Cow box.

See you next time!

Love & Hugs,

 Cathryn